| Maximum Diameter Ground | 20" (500 mm) |
| Minimum Diameter Ground | 1.2" |
| Center Height | 10.6" (270 mm) |
| Max. Length Ground | 120" (3000 mm) |
| Max. Load | 2200 lbs. |
| Table Travel Speed | 4-157 IPM |
| Spindle Speed | 870 RPM |
| Workhead Motor | 7.5 HP/ 5 KW |
| Table Swivel | 7 Degrees +/- 3 Degrees |
| Wheelhead Travel | 9.84" (250 mm) |
| Min. Wheelhead Travel by Incremental Feed | 0.0001" |
| Rapid Approach | 3.93"(100 mm) |
| Workhead Speed (Variable) | 22-168 RPM (Approx.) |
| Taper in Workhead | 6 MT |
| Taper in Footstock | 6 MT |
| Tailstock Quill Travel | 2.75" (70 mm) |
| Wheel Size | 30" x 3" x 12" |
| Spindle Motor | 22 HP (15 kW) |
| Power Requirements | 3 Phase, 60 Cycle, 220 Volt |
| Approximate Weight | 30,000 lbs. |
EQUIPPED WITH:
(3) Follow Rests. Work Light. Infinitely Variable Speed Hydraulic Transverse. Incremental Infeed. Variable Speed Dead Center Motorized Workhead. Steelway Guards. Cantilevered Bed Ways. Table Taper Swivel with Vernier and Micrometer. Tailstock with Handwheel Quill Advance. Tailstock Mounted Dresser. Coolant Pump and Tank with Canister Filtration. Splash Guards.
872 S Milwaukee Av Ste 256
Libertyville, IL 60048
© 2026 Adams Machinery Company