|Working Surface of Table||18" x 96"|
|Overall Size of Table||18" x 104"|
|Vertical Adjustment of Spindle Carriers||10"|
|Center Line Table to Spindle: Maximum||11.5"|
|Center Line Table to Spindle: Minimum||5.5"|
|Top of Table Centerline of Spindle: Maximum||16"|
|Top of Table Centerline of Spindle, Minimum||6"|
|Size of Spindle||#50 NST|
|Speed Range||(16) 30-1200 RPM|
|Feed Range||(Infinite) 1/4 - 150 IPM|
|Rapid Traverse Rate||300 IPM|
|Approximate Weight||23,000 lbs.|
|F.O.B.||NV Shipping Point|
Motor Driven With 30 HP, 3 Phase, 60 Cycle, 480 Volt Spindle Drive Motor. 5 HP Hydraulic System. Complete Electrical Controls. Selector For LH/RH Automatic Quill Advance And Retract. Load Meters. Coolant. Hardened Bed Ways. Assorted Change Gears.
This machine is being offered As Taken From Service, however it appears to be in good operating condition and can be inspected under power.