Specifications
Maximum Grinding Diameter |
3 inches |
Swing over Table |
5 inches |
Maximum Table Travel |
13.75 inches |
Capacity between Centers |
12 inches |
Table Swivels in either Direction |
10° |
Hydraulic Table Travel |
up to 120 IPM |
Wheel Size |
12" x 1.5" x 5" Bore |
Workhead Speed Range (Variable) |
100 - 900 RPM |
Hydraulic Wheelhead Rapid Retraction & Advance |
1.125 inches |
Wheelhead Infeed (Mechanical) |
0.0001" - 0.001" |
Total Travel of the Wheelhead by Feed Screw |
3.875 inches |
Variable Dwell at Each End of Table |
0 - 8 seconds |
Wheelhead Motor |
3HP, 3/60/230v |
Workhead & Hydraulic Motor(s) |
1/2HP |
Approximate Weight |
2200 pounds |
Equipped With
Swing Down Internal Grinding Attachment. Motorized Swiveling Workhead That Can Be Swung Through 90 Degrees Allowing For Face Grinding Operation And Tapered Components. Live Spindle Grinding. Lever Operated Collet Chuck With Large Quantity Of Collets. Hydraulic Table Traverse. Automatic Plunge and Traverse Grinding Cycles with Depth of Feed Adjustment. Coarse/Fine Feed Changeover. Program Selector. Spark-Out. Variable Dwell At Each End Of Table Movement. Hydraulic Rapid Retract And Advance To Wheel Slide. Automatic Mechanical Infeed To Wheel Slide. Swiveling Work Table. Tailstock With Diamond Holder Bracket. Hydraulic Unit. Free Standing Control Panel. Lubrication System. Coolant Pump And Tank.
This machine is being offered thoroughly checked out in our shop, cleaned and cycled. It is being offered with a 30-Day Return Privilege and may be inspected under power here in our plant.