| Maximum Swing over Table | 18-15/16" |
| Nominal Distance Between Centers | 48" |
| Distance from Floor to Centers | 45-3/4" |
| Toward Wheelhead | 7° |
| Away from Wheelhead | 2° |
| Toward Wheelhead | 3" |
| Away from Wheelhead | 1-1/4" |
| Grinding Wheelhead Swivel Upper | 90° |
| Grinding Wheelhead Swivel Lower | 30° |
| Size of Grinding Wheel | 14" x 1-1/2" x 5" Bore 14" x 1" x 5" Bore |
| Cross Feed: Automatic Pickfeed at Table Reversal | .0002-.005 |
| Headstock & Footstock Taper | No.10 B&S |
| No. & Range of Headstock Speeds (Infinite) | 25-200 RPM |
| Headstock Spindle Nose, American Lather Standard | 6" |
| Headstock Swivel | 90° Towards Wheelhead 30° Away from Wheelhead |
| No. & Range of Table Speeds (Infinite) | 3-220 IPM |
| Minimum Movement Required to Reverse Table | 3/32" |
| Wheelhead Motor | 5 HP |
| Hydraulic Pump Motor | 1-1/2 HP |
| Headstock Motor | 1 HP |
| Internal Grinding Motor | 2 HP |
| Coolant Pump | 1/4 HP |
| Presently Wired for | 3/60/460V Operation |
| Approximate Weight | 15,000 Lbs. |
601 N. Skokie Hwy, Unit D
Lake Bluff , IL 60044
© 2024 Adams Machinery Company